Lecol UV Polish OH42 can be used on parquet and in particular, in anti-scratch floors. Lecol UV Polish OH42 is very resistant to heavy machinery, and to dirt and rubber marks. Lecol UV Polish OH42 is a solvent-free polish.
Before Lecol UV Polish OH42 yield, the floor must be free of dust, and grease. Do you have an older floor? Then you must first clean the floor thoroughly with Lecol Remover OH45 so the floor is completely clean and free of grease, dust and wax. The remover usually rinse with water. Lecol UV Polish OH42 undiluted with a polish distributor on a completely dry floor. When the treatment or no urination or bubbles occur. If you have a 2nd layer Lecol UV Polish OH42 want to bring necessary in an open porige floor, then you must make sure that the previous coat is completely dry. If your floor is dull, you can partly or entirely new layer.
Lecol UV Polish OH42 is supplied and need not be diluted.
The drying time per coat is not very long, around 20 minutes to an hour. For normal use, bring 1 litre undiluted by 25-30m ². After use it is recommended to clean the floor with Lecol Clean OH49 .
1 litre bottle
This product has past the BEST BEFORE DATE but this will not affect the performance of the product.