Tackfast medium pin concrete gripper comes with pre-nailed masonry nails 20mm for a firm fixing and is suitable for use on all carpet types.
The ideal product for stretch fit carpet installations, Tackfast gripper is made from high grade resin bonded plywood, five ply (6mm) thickness, machined on one edge to a defined angle and penetrated from the underside by two rows of passivated pins.
The Pins are set at an angle of 60deg to eliminate pull-out and bending, even when power stretching. The carpet backing is then held in place by the pins to allow for correct tension.
Application: Nail gripper approximately 6mm away from the face of the skirting so that the carpet can be tucked into the gap between the gripper and skirting board.
Pack Size: 500Ft (100 x 5ft Lengths) 152.4metres